Stainless Steel Bars ,Rods & Wire

Approx. Rs 300 / KilogramGet Latest Price

Additional Information:

Approx. Rs 170 / KgGet Latest Price

15-5 stainless steel is a precipitation-hardening, corrosion resistant, martensitic steel that shows good mechanical properties at temperatures up to 600° F. 15-5 is capable of high hardness and strength after a simple heat treat. 15-5PH has high strength and good toughness in all directions as a base stainless steel and in welding applications.

15-5 stainless steel can be heat treated at low temperatures for a short time to minimize scaling and distortion. 15-5 when vacuum arc remelted improves cleanliness. 15-5ph is martensitic and magnetic in both PH (precipitation hardened) and solution treated conditions.

When 15-5 is precipitation hardened in a single low temp range from 900° - 1150° scaling and distortion are practically eliminated. That enables 15-5ph to be machine finished to close tolerances before heat treatment.

15-5 stainless steel is extremely resistant to a wide variety of corrosion. When hardened at temps of 1000° and higher 15-5 is highly resistant to stress corrosion cracking. 15-5PH can be heat treated at low temperatures for a short time to minimize scaling and distortion. 15-5 when vacuum arc remelted improves cleanliness. 15-5 is martensitic and magnetic in both PH (precipitation hardened) and solution treated conditions.

When 15-5 is precipitation hardened in a single low temp range from 900° - 1150° scaling and distortion are practically eliminated. That enables 15-5ph to be machine finished to close tolerances before heat treatment. 15-5 is extremely resistant to a wide variety of corrosion. When hardened at temps of 1000° and higher 15-5 stainless steel is highly resistant to stress corrosion cracking.

This Stainless Steel is available in 15-5ph round bar, 15-5ph hex bar, 15-5ph flat bar, 15-5 ph plate, 15-5 ph sheet, and 15-5 square bar.

Additional Information:

Approx. Rs 250 / KilogramGet Latest Price

• XM-19 (UNS S20910)
• Nitronic 50 Annealed
• XM-19HS

Approx. Rs 250.00 / KilogramGet Latest Price

Additional Information:

Approx. Rs 200 / KgGet Latest Price

Primary Elements: Stainless Steel 630 are alloys primarily comprised of 17 percent Chromium, 4 percent Nickel, 4 percent Copper, with the balance being Iron, along with trace amounts of Manganese, Phosphorus, Sulfur, Silicon, Columbium and Tantalum.

Features: Stainless Steel 630 is classified as a precipitation hardened steel. Stainless Steel 17-4 ph can be forged, welded and formed. Machining is performed in the solution-annealed state, followed by precipitation hardening. While the hardening occurs over a range of temperatures, ductility and strength can be adjusted to achieve a range of mechanical properties.

Bar Types Available:

Industries Served:

Considered to be the most commonly used precipitation hardening grades 

Additional Information:

Approx. Rs 300 / KgGet Latest Price

Approx. Rs 200 / KilogramGet Latest Price

Over the years we have satisfied a huge clientele for our offered range of Stainless Steel Flat Bars. These offered bars are widely appreciated by our customers for their accurate dimensions and availability in various sizes. Keeping in mind the satisfaction and varied demands of the patrons, we are also manufacturing them as per the needs and demands of our prestigious clients.

Features:

• Optimum quality
• Abrasion resistant
• Durable

Approx. Rs 800 / KilogramGet Latest Price

316L VM Stainless Steel, often referred to as surgical grade stainless steel or implant grade stainless steel, is our most commonly sold medical stainless steel. Breaking down the name, this is a low-carbon version of 316 that has been either electro slag remelted or vacuum arc remelted to reduce impurities.

This process removes impurities and helps to form a more effective chromium oxide layer on the surface of the material than ordinary stainless steel. This layer helps hold nickel inside the bar, preventing it from triggering an allergic reaction. This protective surface also increases the length of time an implant can remain in the body without leeching into the surrounding tissues.

Additional Information:

Approx. Rs 50 / KgGet Latest Price

Approx. Rs 90 / KilogramGet Latest Price

P20 tool steels are used for low temperature applications that include injection molds and die casting dies. Main applications of P20 steel plate and bar:

Plastic moulds, die holder, backers, rames for plastic pressure dies, hydro forming mold tools.bolsters, die holders. Also suitable for other applications such as rails, shafts and wear strips.

We are reliable P20 tool steel, P20 steel plate, steel round bar and P20 steel flat supplier. Quality guarantee and reliable service make us a better choice for you for P20 special tool steel. We offer better P20 steel price and supplier service. Contact us today.

Additional Information:

Approx. Rs 185 / KgGet Latest Price

Approx. Rs 250 / KilogramGet Latest Price

Enriched with years of experience in the industry, we are engaged in offering Nitronic 60 Round Bar.

Approx. Rs 750.00 / KgGet Latest Price

Additional Information: